5 Key Components Of An Emergency Exit Plan

Posted on: September 4th, 2019 by All Protect Systems

You never know when an emergency will happen. This is why you have to plan in advance and have an emergency exit plan in place. Simply having exit signs and an alarm system isn’t enough. People have to know what to do and who to follow when the worst happens. During a time when it’s […]

How To Limit False Fire Alarms

Posted on: August 1st, 2019 by All Protect Systems

False fire alarms are not only annoying, but they waste the time and resources for your local fire department. The good news is there are ways to help limit these false alarms. While some false alarms may still happen, they’ll occur much less frequently. Taking the time to do this can prevent costly fines and […]

5 Tips For Better Fire Extinguisher Placement

Posted on: July 1st, 2019 by All Protect Systems

Simply having fire extinguishers is a great first step to keeping everyone safer in the event of a fire. However, if they’re not easily accessible, they may not be useful at all. This is why fire extinguisher placement is so important. Knowing exactly where to place your fire extinguishers could mean the difference between stopping […]

Time To Change Your Batteries In All Smoke And Carbon Monoxide Alarms

Posted on: June 2nd, 2019 by All Protect Systems

Replacing your smoke or carbon monoxide alarm batteries is one of the most important household chores. It’s not something we often think about, but we know that ignoring it for too long could have very negative consequences. For smoke and carbon monoxide alarms to do their job, they need to have working batteries. Once a […]

How Often Should You Review Your Fire Safety Plan

Posted on: May 1st, 2019 by All Protect Systems

A fire safety plan is designed to help you escape as quickly and safely as possible should the worst happen. However, it shouldn’t be a plan that’s created once and never looked at again. Over time, things may change in your structure requiring revisions to your plan. Of course, if the use of the building […]

Introducing Our New Look!

Posted on: March 29th, 2018 by All Protect Systems

All Protect Systems is proud to announce that we have completed our re-branding project! This re-branding reflects both the sale of our security division and the addition of in-house fire extinguishers to our service offerings. We now specialize in: complete fire alarm and fire warning systems servicing, fire extinguisher sales and service, and, emergency and […]

Backflow Testing

Posted on: March 16th, 2018 by All Protect Systems

In most buildings you will find two backflow prevention devices. The purpose of these devices is to protect potable water supplies from contamination or pollution due to flow back into the public supply lines. It is a mandatory requirement that these devices be tested on an annual basis and proper test reports completed. The domestic […]

Is Annual Maintenance Required?

Posted on: February 25th, 2018 by All Protect Systems

In Ontario, The Ontario Fire Code outlines the annual requirements for maintaining your fire alarm, emergency/exit lighting, fire extinguishers and other life safety systems. It is mandatory not optional to make sure the systems installed in your building are functioning as intended to protect life and property as needed.  There are also daily, weekly, monthly […]

Fire Extinguisher Servicing

Posted on: January 29th, 2018 by All Protect Systems

A proper annual inspection of a Fire Extinguisher consists of not only signing the inspection tag but also visually inspecting the exterior of the cylinder for damage, corrosion or wear. This is important as the extinguisher does contain a charge to allow it to propel the powder when activated. When doing an annual inspection the […]